|
Ericsson GH688 & GA688 Unlock /Secret Codes |
Ericsson
GH688 Secrets
Advertisement
Full Operator
List
You can view the full operator list by doing the following
:
Go to the 'Edit list' menu under 'Networks'. The phone
say "Please wait" (searching for other networks).
When finished, Press the < key once, then YES twice.
Now the phone displays the full list. Browse through
the list with the < > keys.
Monitor
Mode On Ericsson GH688
How to enable net monitor on Ericsson 688.
1. Remove
SIM from phone
2. Dial 112, press YES, hear something
3. Dial 112YESNO
4. Press <(left arrow) before SETTINGS
5. Then YES, <(left arrow), then you will see NM
on?
6. press YES
*#06# :
For checking the IMEI (International Mobile Equipment
Identity)
*#0000# : Resets the phones menu-language to English.
*#103# followed by 'YES' : Time and date will be shown.
>*<<*<* : Checking the firmware revision
information (software release)
>*<<*<*> : 1-row text strings. By pressing
"yes", you can check the phones text programming
in currently selected language. (298 entries)
>*<<*<*>>
: n-row text strings. By pressing "yes", you
can check the phones text programming in currently selected
language. (160 entries).
The Service
Provider Lock
The Service Provider (SP) Lock menu is used to lock
the cell phone to the SP's SIM card. Once the cell phone
is locked to a specific operator, if one inserts a SIM
card from a different operator the phone will refuse
to accept it. The cell phone will however accept another
SIM card from the same operator.
To activate/deactivate
this lock one needs a special secret code that is not
available to the end user.
Here is
how to activate the menu :
<**< Lock to Network? By pressing "yes",
you have 5 attempts to enter NCK.
<**<< Lock to Network subset? By pressing "yes",
you have 5 attempts to enter NSCK.
Warning:
Your phone can be locked to a service provider FOREVER
by doing this! If an invalid code is entered all five
times, the menu will exit and be deactivated! Any further
attempt to activate the NCK/NSCK lock Menu will result
in the response "Not allowed"! However the
NCK/NSCK lock can be recover through a direct clearing
in the EEPROM.
Shortcut
for Last Dialed call menu
If you for some reason don't want to enter the 'Last
Dialed calls menu' by using the 'YES' key you can use
the following key stroke instead :
First '0' then '#'.
Display
Battery Level Indicator When Phone Turned OFF
When the phone is turned off and the phone is not changing
- the battery level can be seen for a short period of
time by pressing the 'NO' key quick once (it has to
be quick!) and then wait for about 2 sec. The battery
level will now be shown in the display at its normal
position.
Access
menu without SIM card
To access to the menu in your phone without having a
card inside do the following :
type **04*0000*0000*0000#
When display say "Wrong Pin" press NO and
you have access to the all menus: Info, Access, Settings,
Calculator, Clock, Keylock On?, Mail, Phone book.
NOTE : If you try this on your phone may stop at Keylock
On? menu and you´ll have to take your battery
out to turn the phone on again.
Alarm Clock
Menu
Go to Missed Call. Empty the list. Press the -> key
for a second or two. The option Menu size turns up.
Choose 'yes' and go from there. An alarm clock turned
up too but it never rang. (I think this was because
there is no clock in the phone!)
Free Phone
Calls :
This trick has only been reported working on PREPAID
GSM CARDS and in some countries and with some software
versions. The prepaid GSM SIM CARD is a kind of "SIM
card" which only has a certain amount of credit
on it.
Dial the
number normally and press YES. While "connecting"
is shown on the screen, the following procedure should
be carried out :
Press CLR
then 0 then # and then NO (twice) so as to switch OFF
the phone. You can then still speak on the phone while
it is switched off but the SIM card does not record
your calls which will lead to FREE phone calls (in some
countries only).
Another
variant of the code
Make a
Call, while the phone says "Connecting",
Type 083# (the position 83 must be empty). When phone
says "Position Empty", press the NO key and
turn off the phone.
If you
can make the call with the phone turned off you will
face a problem when you need to hang up the phone (i.e.
disconnect)... The only way for you to do that is remove
the battery !
Advertisement
|